What type of paper cutter do you have? There are certainly different types and models. You want to use one of these devices safely, and you want to get the most out of it as well. There are all kinds of things you need to know. Here are some important tips that can help you get the most out of your paper cutting sessions.

Not only are there different types of these devices, but there are also various types of paper. You want to know the different cut patterns that apply to the type of paper involved. It’s all about getting the most pieces based on your needs. And you don’t want rough edges either, which means that any folds should not be running ‘against the grain’ of the paper being cut.

Paper can be subject to both shrinkage and expansion. That being said, the experts say that you might at times find that any printed cut lines on the paper might not be ideal to use. What about narrow strips? You need to watch your clamp guides in those circumstances because failure to use place lifts can actually cause unnecessary wear and tear. As you can tell, there is so much to know when it comes to using paper cutting machines properly.

Remember that a dull blade can cause accuracy issues, and that’s not something you want to have to deal with. Also, you need to know that clamping pressure isn’t always going to be the same. It needs to be addressed according to the type of paper, and of course, the right amount of pressure is important.

Do you know what happens when there is too much pressure applied? Pile distortion is one of the complications that can arise, and of course, inaccurate cuts can be another possible consequence. You don’t want to be dealing with either one of those issues, but at the same time, there are consequences to inadequate pressure as well. That paper needs to be secured properly.

Let’s say that you have a guillotine paper cutterr. One tip you would want to know is that you need to cut 10 sheets or less at a time. Not only do you want the right cuts made, but you don’t want to negatively impact the blade. Trying to overwork the cutter is going to dull the blade.

While paper trimmers make these jobs easier, you still have to take your time. One of the most common mistakes made is overloading the paper cutter all at once. Remember that you can recycle those paper scraps, too.

The guillotine paper cutter is said to be one of the best. It’s just one of your choices, however, when it comes to choosing the right device for your projects.

Be aware of the safety features that are part of your machine. You might want to also test out scrap paper prior to beginning any particular project. Good luck and contact us if you have any questions.